FAQ No. FAQ02709
Question
How can the
NS-series Programmable
Terminal's system program be reinstalled?
Answer
Applicable Models:
NT30, NT30C, NT620S, NT620C, NT625C,
NT31, NT31C,
NT631, and NT631C
The system program cannot be installed from a computer for other NT-series
Programmable Terminals. It can be changed by replacing the system ROM. A
Memory Card must be used to reinstall the system program for an NS-series
Programmable Terminal.
System
Program:
System programs for the applicable models (listed above) are included in
the CD-ROM for NT-ZJCMX-V4 (Windows version of
NT Support Tool).
Procedure:
The system program is transferred by the system installer. Connect the
computer to the Programmable Terminal with the cable that is used for
transferring screen data.
For details on how to use the software, refer to the operation manual of
each and the Windows version of the NT Support Tool.
Note: Windows is a registered trademark of Microsoft Corporation.
Other Programmable Terminal
FAQs
 Is it possible to connect multiple PLCs to a single PT?
A message saying the system is being initialized is being displayed. How can I restore operation?
When multiple PTs are connected to a PLC with 1:N NT Link communications and an error occurred in one of the PTs, is it possible to detect that error from the PLC?
| 
Sitemap
