|
|
 |
 |
|
Product Index ::
Automation Systems
:: Industrial Network ::
Controller Link
|
CS1W-CLK
SYSMAC CS-series Controller Link Units
CS1W-CLK23 / CS1W-CLK13 /
CS1W-CLK53
|
|

|

|
* Ordering information
* Specifications
* Configurations
* Dimensions, and etc
|
|
can be found in our PDF brochure.
|
|
New Controller Link Units,
Now with 4,000 Send Words
The Controller Link is an FA network that
can send and receive large amounts of data easily and at high speed.
The Controller Link supports data links
that enable sharing data between PLCs and computers and a message
service that enables sending and receiving data whenever required.
With Wired Controller Link Units, systems
can be flexibly built by using Repeater Units to enable T-branches,
long-distance wiring, and converting part of the network to optical
cable.
|
|
Features |
|
-
Large-capacity data links are easily achieved without programming simply by
setting data link tables.
-
Up to 20,000 (See note 1) send/receive words can be set per node for Units (up
to 62,000 words for Boards).
-
Data links can be performed with up to 4,000 (See note 2) words per node while
ensuring data concurrency.
-
User-set data link tables can be changed while data links are operating. (See
note 3)
-
Errors for the entire system can be monitored by using error diagnosis support
software and a variety of status flags.
-
With the token ring mode of Optical Ring Controller Link Units/Boards, duplex
communications paths enable communications to continue normally even if the
cable becomes disconnected.
-
Detecting locations of disconnection greatly shortens time required for
maintenance.
-
Installing Controller Link Units in a CS1D system enables Duplex
Communications Units to further enhance reliability. (See note 4)
Note:
1.
Supported for unit version 1.2 or later.
2. CS1W-CLK[]3 and 3G8F7-CLK[]3 are supported.
3. Supported for CS1W-CLK[]3, 3G8F7-CLK[]3, and models ending with "-V1"
(CS1W-CLK12-V1 and CS1W-CLK52-V1 with lot numbers 0306[][]_[][][] or later ).
4. Supported for CS1W-CLK13/CLK12-V1/CLK53/CLK52-V1 and CS1D Duplex and Simplex
Systems.
|
|
System
Configuration |
|
Wired Controller Link Units
Basic Wiring (Daisy Chain
Connections)

Long-distance Wiring

T-Branch Wiring, Partial
Conversion to Optical Cable

A:
Wired Controller Link Unit
B: Wired Controller Link Support Board
C: Wire-to-Optical Repeater Unit
D: Wire-to-Wire Repeater Unit
* At 500 kbits/s
(1): Twisted-pair cable
(2): Optical cable
Optical Controller Link Units
Token Ring Mode

Token Bus Mode

A: Optical Ring Controller Link Unit
B: Optical Ring Controller Link Support Board
(1): Optical cable
|
|
top |
See Related Products:
![CS1W-RPT0[] Repeater Units](../thumbnail/CS1W-RPT0[].jpg)
|
Repeater Units
CS1W-RPT0[]
Allow T-branching of wired units,
longer cables, system expansion, and optical links within the
network. |

|
Programmable
Controller
CS1H / CS1G
Highly functional PLC best fit for any
large scale and complex automation systems. |
|
|
 |
|