|
Position Control
Communications Setup Integrated into the
CX-Programmer
Applicable Models: CJ1W-NC[]81
Set Up the
Position Control Units and Servo Drives from One Connection
Just connect the computer to a CPU Unit port
to set up the EtherCAT-compatible Position Control Units and EtherCAT
communications.
You can also directly start the CX-Drive Support Software to set the Servo
Drives connected to the Position Control Units.
Network
Applicable Models: CJ2
Easy connection with USB
A standard USB cable can be easily connected to the USB port on the front
of the CPU Unit.
Easy Connection with EtherNet/IP
Easy connection by specifying the computer LAN (Ethernet) port and IP
address only.
* CJ2 (built-in EtherNet/IP) CPU Units only.
Prevent Connection Errors by Verifying PLC Names
The CJ2 CPU Unit can record a PLC name. Errors in transfers can be
prevented ahead of time because the PLC name can be compared with what is
in the project file when connecting online.
Easy Setting of Tag Data Links for
EtherNet/IP
In addition to creating data links with the EtherNet/IP Datalink Tool
using I/O memory addresses, you can also use network symbols for tags to
easily create the data links.
With EtherNet/IP, high-speed, high-volume data links can be created with
different cycle specifications for each applications, regardless of the
number of nodes.
*CJ2 (built-in EtherNet/IP) CPU Units only.
Debugging
Time Required for Onsite Startup and Debugging Has Been Significantly
Reduced
With CX-One version 4.0, debugging is efficient with simultaneously
monitoring and management of multiple networks and PLCs.
Management of Multiple Networks
The operation of networks with configurations consisting of multiple
networks including PLC networks such as EtherNet/IP and Controller Link,
field networks such as DeviceNet and CompoNet, and networks for
Programmable Terminals and Serial Devices, can be restored simultaneously
from the CX-One.
Onsite start up and debugging can be conducted efficiently and without
errors because PLCs and devices can be selected from the window to
transfer programs and parameter data to the computer during operation.
Ladder Diagram Monitoring for Multiple PLCs
Multiple PLCs can be monitored by displaying them in series on the screen.
This way it is easy to debug data links between PLCs and monitor the
inputs and outputs of different PLCs.
Screen Designing using CX-Designer / NV-Designer
The CX-Designer Simplifies the Processes from Screen Design to Debugging
for the NS-series Programmable Terminals
The time required for designing can be significantly reduced because of
the compatibility with SYSMAC CJ-series PLCs. The process of designing
screens is easier with expanded functionality.
Applicable Units: NS Series, NSJ
Series
Communications Components and the Smart Active Parts (SAP) Library
Significantly Reduces the Time Required to Create Ladder Diagrams and
Screens
There are over 3,000 Smart Active Parts that can directly access OMRON
PLCs and components. Simply select and paste a part from the SAP library
onto the screen. Detailed screens and ladder diagrams do not need to be
created.
Using Software Components, Error Checking and Parameter Setting Can Be
Done without a Computer
There are many software components in the Software Function SAP Library
that can be easily incorporated into the NS-series Programmable Terminals.
Simply select and paste software components on the screen. Device errors
can be checked and parameters set without a computer.
Use the NV-Designer to
Easily and Quickly Design Screens for the NV Series of Compact PTs
Applicable Units: NV Series
Servomotor Control using CX-Motion-NCF & CX-Motion-MCH
The CX-Motion Supports Motion Network Servo Systems
Improve productivity of motion network servo systems using EtherCAT/Mechatrolink-II
for design, startup, and maintenance.
Easy Management of Parameters While Still Connected to PLCs
CX-Motion-NCF
Even Easier to Start Up a System
CX-Motion-MCH
Control of Temperature Controller using CX-Thermo & CX-Process Tool
The CX-Thermo/CX-Process Software Supports High-level Temperature Control.
Setting Temperature
Controller Parameters Is Easier
CX-Thermo
Parameters can be easily set from a list:
-
Easy Parameter Settings
Parameters can be set even for Temperature Controllers that do not support
communications.
Parameters can be saved, and then copied, or reused and edited (Parameters
can be exported in CSV or HTML format.)
-
Displays Only What Is Used
To avoid unintentional use of parameters, unused parameters can be masked
(i.e., hidden)
Applicable Units:
E5CN/E5CN-H/E5AN/E5AN-H/E5EN/E5EN-H, EJ1, E5ZN, E5AR/E5AR-T/E5ER/E5ER-T
*The DeviceNet type is excluded
Programming for the Process Controller Is Easier
CX-Process Tool
Control Programs can be constructed by pasting
function blocks:
-
Control Can Be Customized
Control programs can be constructed by pasting function blocks and
connecting them. They can be used for simple PID control, program control,
and cascade control.
-
Easy Creation of an HMI
Screens for the NS-series PTs (NS runtime screen) are automatically
generated from the function block programs. Standard control screens and
tuning screens do not need to be created manually.
Applicable Units:
CJ1G-CPU4[]P/CPU4[]P-GTC, CS1W-LCB01/LCB05/LCB05-GTC, CS1W-LC001,
CS1D-CPU6[]P
Online Web Services
OMRON’S CX-One offers many service options in the Internet environment so
that engineers and online support is available from anywhere in the world
24 hours a day.
Online User Registration
When you register online as a user of CX-One, all CX-One software
components can be registered at once. The online registration website can
be accessed from Japan, North America, South America, Central America,
Europe, Africa, Asia, China, Taiwan, and Korea. You can access the
Internet services from anywhere once you have registered.
Automatic Update
With the automatic update function of CX-One, the latest update
information for your computer environment can be searched for and applied
using the network environment. Your CX-One can be constantly updated to
the latest state. It is also possible to update only the necessary tools.
Download Services
Control devices that were made available after you purchased the Support
Software can be used if you download the latest Smart Libraries from the
Internet. A customized library can be made by downloading the Smart FB
Library and Smart Active Parts for the hardware that you require.
Programming is also easy by selecting and pasting the necessary parts.
|
Sitemap
![CJ1W-NC[]81 Position Control Unit with EtherCAT Interface](../thumbnail/CJ1W-NC[]81.jpg)
