|
|
|
Type 2 Human Body Sensor for
Production Equipment
Be sure to use the E3FS Sensor with the
F3SX Safety Controller. Connects to the B1 Module of an F3SX Safety
Controller to create a Type 2 Safety Sensor.
|
|
Sensor Heads Available in Two
Types: ABS Resin and Metal
Both types conform to IEC standards with IP67 degree of protection.
|
|
Maximum Sensing Distance of 10
m
|
|
Connect up to 3 sets in series.
Prevents mutual interference.
Up to 3 sets can be connected in series
by using both the standard model and a series-connection model with a
connector. You can create a 3-set system by just wiring one set - no
need to wire three sets separately as was required with earlier
models. This facilitates protection for all dangerous machine and
device surfaces. Mutual interference is also prevented.
|
|
Connect up to 4 E3FS Sensors per
B1 Module to the F3SX Safety Controller
Note: The B1 Module is an input module
for E3FS Sensors. It is made specifically for the F3SX Safety
Controller. The safety output turns OFF when light is interrupted or
when an error occurs for one or more E3FS Sensors connected to the B1
Module.
|
|
Connect up to 4 E3FS Sensors per
B1 Module to the F3SX Safety Controller
This is achieved using an
F3SX-E-B1B1B1B1 (customized product).
Can be used in combination with
Light Curtains, Door Switches, and other safety equipment
Simple Connection
Easy to Read
Conveniently located LED indicators are
easier to read.
|
|
Configuration Example |
|
E3FS Single-beam Safety Sensors were
added to the F3SX Series of Safety Controllers to allow one unit to
handle all required inputs and outputs.
|
|
Applications |
|
For Gaps in Small to
Medium-sized Equipment
Use as a safety measure for protection
from hazardous gaps or as guards for medium-sized equipment.
The E3FS is a Human Body Detection Sensor (Type 2) for production
equipment. Make sure to use it in combination with a F3SX Safety
Controller. A combination of E3FS and E3ZS Sensors can be connected to
the B1 Module of the F3SX.
* Since the E3FS has not received any
safety certification for use by itself, make sure to connect it with
an F3SX for use in safety applications.
|
|
 top |
See Related Products:
|
Single-beam Safety
Sensor
E3ZS
For hazardous gaps in machines or
long lines consisting of multiple machines. |
|
Safety Controller
F3SX
Safe, simple and visible Safety
Controller with no programming. |
|
Sitemap
