|
Models with New
Connector System Reduces Wiring, Saves Space, and Makes Maintenance Easier
(First in the Industry) (Patent Pending)
In Amplifiers with wire-saving connectors, the power supply is distributed
to 1-conductor slave connectors through a 3-conductor master connector.
This design has three major advantages.
-
Wiring time is significantly reduced.
-
Relay connectors are unnecessary, so wiring takes up less space and
costs are reduced.
-
Storage and maintenance are simpler because it is
not necessary to
distinguish between master connector and slave connectors on the
Amplifier.
Super Digital Display with Auto Power Control (APC)
Circuit (First in the Industry)
The passage of time causes the intensity of the Sensor's light emitting
LED elements to deteriorate, which may make stable detection impossible.
The E3X-DA-N is the first series of Fiber Sensors to use an Auto Power
Control (APC) circuit. This achieves strict detection by eliminating
fluctuation in the digital value and is ideal for subtle detection such as
stable detection of liquid crystal glass.
Power Consumption Reduced by As Much As 70%
Digital Display Can Be Turned OFF or Dimmed
during Operation (Eco-mode)
When the digital display is viewed infrequently during operation, current
consumption can be reduced by dimming the display or turning it OFF
entirely.
(Eco-mode can be set from the Mobile Console only.)
New Generation of Mobile Consoles the Size of
Cellular Phones.
Further Developing the Ultimate Power of Fiber Amplifiers.
Remote Setting and Adjustment
Perform settings, teaching, and fine adjustments at the end of the Fiber
Unit.
With group teaching, teach multiple amplifiers simultaneously.
Eliminate inconsistency by using group zero reset.
Flash the Sensor head and display the amplifier channels during operation.
Display the light intensity and threshold at the same time.
|
Sitemap
