E3ZS Single-beam Safety Sensor

Connect up to 4 sets of E3ZS/E3FS per B1 Module for F3SX Safety Controller

Note: The B1 Module is designed specifically for E3ZS/E3FS input of the F3SX. The safety output turns OFF when light is interrupted or when an error occurs with one or more of the E3ZS/E3FS Sensors connected to the B1 Module.

Connects Simply and Easily Using a Wide Range of Accessories

Connects to a B1 Module for F3SX to create a Type 2 Safety Sensor

Conforms to IEC, EN, and other international safety standards.

Applicable Standards
International standards: IEC61496-1 (type 2 ESPE)
IEC61496-2 (type 2 AOPD)
European standards: EN61496-1 (type 2 ESPE)
peEN61496-2 (type 2 AOPD)

Applications

For Gaps in Small-sized Equipment

Protect personnel from the hazards of gaps in small-sized equipment or of semi-automated machinery.

The E3ZS is a Human Body Detection Sensor (Type 2) for production equipment. Make sure to use it in combination with an F3SX Safety Controller. When used by itself, the E3ZS conforms to EN954-1 (Category 1). No particular safety restrictions apply to the E3ZS when used by itself, except the inability to use in human detection safety applications. We recommend using it in Light ON mode and using it with error detection via test input.

* Test input
Use this function to enable the emitter of E3ZS to be turned ON/OFF from outside. It is possible to detect a number of E3ZS errors by monitoring the status of the test input and the E3ZS output signal.

top

See Related Products:

	Single-beam Safety Sensor     E3FS Detects intrusions into hazardous areas with a single beam.
	Safety Controller     F3SX Safe, simple and visible Safety Controller with no programming.