 |
|
Member Area
Find out information related to ER.
Catalogs/Manuals
Related Contents
|
|
|
 |
|
|
 |
|
 |
 |
|
Product
Index ::
Safety Solutions ::
Emergency Stop Switches
|
ER
Rope-Pull E-Stop Switch
|
|
|
|
* Ordering information
* Specifications
* Configurations
* Dimensions, and etc
|
|
can be found in our PDF brochure.
|
|
Emergency Stop Needed in
Material Handling from 40 m up to 200 m with a Single Switch
-
Safety rated.
-
IP67 (NEMA 6) enclosure enables ER Series
switches to withstand water washdown cleaning.
-
Blue Reset Button easily return unit back
to machine-run operation after actuation.
-
The Tension Indicator makes the system
easy to set up and to maintain the proper rope tension.
-
Vibration tolerant - the snap-acting
switch contacts protect against nuisance tripping due to vibration.
-
Heavy-duty housing-the diecast housing and
stainless steel eye nut makes the ER Switches suitable for demanding industrial
applications.
-
Long life - ER Series Switches are designed for
a minimum of one million actuations.
-
Integrated two-color indicator beacon.
-
Explosion-proof and stainless steel
version also available.
|
|
Nomenclature |
|
Integrated 2-color
Indicator Beacon
|
|
Applications |
|
Typical
applications are on conveyor systems and across rotating machinery, and around
hazardous areas.
Machine Pit
Conveyor
|
|
Product
Lineup |
|
ER5018
Compact Rope Pull Emergency
Stop Switch
-
Compact size allows this switch to be used
on smaller machines with a mounting width of 40mm (1.57 in.) and covering
rope spans up to 40 m (131 ft.).
-
Contact arrangements of 2 N/C + 1 N/O or 3
N/C.
-
Integral E-Stop - the optional E-stop
provides emergency stopping at the extreme end of the installation.
|
Conforms to
IEC947-5-1, IEC947-5-5, EN418, UL508, BS5304, UL and C-UL listed, TUV
certified |
ER6022
Rope Pull Emergency Stop
Switch
-
Long rope spans up to 80 m (262 ft.) means
fewer number of switches required per application.
-
Contact arrangements of 2 N/C + 1 N/O or 3
N/C.
-
Indicator beacon-the optional dual indicator
beacon, available in 24 VDC, can be wired to flash red to indicate a
tripped switch or glow a constant green to indicate a properly reset
switch.
-
E-stop button - the ER6022 has two mounting
positions where the optional E-stop button may be installed; the E-stop
button may be added or replaced in the field.
|
Conforms to IEC947-5-1, IEC947-5-5, EN418,
UL508, BS5304, UL and C-UL listed, TUV certified |
ER1022
Rope Pull Emergency Stop
Switch
-
Long rope spans up to 125 m (410 ft.) makes
this switch ideal for applications where long rope spans are required.
-
Integral E-stop - the E-stop button provides
emergency stopping capability at the extreme end of the installation and
is field serviceable.
-
4 N/C safety contacts and 2 N/O auxiliary
contacts satisfy the most demanding applications.
-
Indicator beacon-the indicator beacon,
available in 24 VDC or 120 VAC, can be wired to flash red to indicate a
tripped switch or glow a constant green to indicate a properly reset
switch.
|
Conforms to IEC947-5-1, IEC947-5-5, EN418,
UL508, BS5304, UL and C-UL listed, TUV certified |
ER1032
Rope Pull Emergency Stop
Switch
-
Long rope spans up to 200 m (656 ft.) makes
this switch ideal for applications where long rope spans are required.
-
Integral E-stop - the E-stop button provides
emergency stopping capability at the extreme end of the installation and
is field serviceable.
-
4 N/C safety contacts and 2 N/O auxiliary
contacts satisfy the most demanding applications.
-
Indicator beacon - the indicator beacon,
available in 24 VDC or 120 VAC can be wired to flash red to indicate a
tripped switch or glow a constant green to indicate a properly reset
switch.
|
Conforms to IEC947-5-1, IEC947-5-5, EN418,
UL508, BS5304, UL and C-UL listed, TUV certified |
ER6022-SS and XER6022-SS
Stainless Steel Rope Pull
Emergency Stop Switch
-
Long rope spans up to 100 m (328 ft.) means
fewer number of switches required per application.
-
Contact arrangements of 3 N/C + 1 N/O or 2
N/C + 2 N/O available for ER6022-SS models; Contact arrangement of 1 N/C +
1 N/O or 2 N/C available for XER6022-SS models.
-
Indicator beacon - the dual indicator beacon
is optional on the ER6022-SS; the indicator beacon can be wired to flash
red to indicate a tripped switch or glow a constant green to indicate a
properly reset switch.
-
E-stop button - the ER6022-SS and XER6022-SS
have two mounting positions where the optional E-stop button may be
installed; the E-stop button may be added or replaced in the field.
|
Conforms to IEC947-5-1, IEC947-5-5, EN418,
UL508, BS5304
ER6022-SS: UL and C-UL listed, TUV certified. |
XER6022
Explosion-proof
Rope Pull Emergency Stop Switch
-
Long rope spans up to 80 m (262 ft.) means
fewer number of switches required per application.
-
Contact arrangements of 1 N/C + 1 N/O.
-
E-stop button - the XER6022 has two mounting
positions where the optional E-stop button may be installed; the E-stop
button may be added or replaced in the field.
|
Conforms to IEC947-5-1, IEC947-5-5, EN418,
UL508, BS5304
cULus pending
|
XER1022
Explosion-proof
Rope Pull Emergency Stop Switch
-
Long rope spans up to 125 m (410 ft.) makes
this switch ideal for applications where long rope spans are required.
-
Integral E-stop - the optional E-stop button
provides emergency stopping capability at the extreme end of the
installation and is field serviceable.
-
Contact arrangement of 1 N/C + 1 N/O.
|
Conforms to IEC947-5-1, IEC947-5-5, EN418,
UL508, BS5304
cULus pending |
|
|
 top |
See Related Products:
|
Emergency Stop Switch
A22E
Safety lock mechanism, install in
22-dia. or 25-dia. panel cutout that prevents misuse. |
|
|
 |
|
Sitemap
