Z4W-V LED Displacement Sensor

Easily inspects dimension tolerances of 0.1 mm

10-µm resolution enables inspection of dimension tolerances of 0.1 mm.

Red spot light lets you identify the inspection location at a glance

A high-luminance LED is used for the light source. The red spot light lets you check the detection location at a glance. A laser is not used, so special safety measures are not required.

4- to 20-mA analog output

4- to 20-mA linear output of 25±4 mm displacement (distance from sensor to object). A linear decision unit (Z4W-DD1C) or various digital panel meters (K3NX, K3TS) can be connected to enable output decisions such as PASS and NG.

The protective structure of the sensor meets the requirements of IEC Standard IP66, so there is no concern even if water splashes on the sensor. Note that any water drops on the lens must be wiped off before measuring.

Easy to view 2-color indicator lamp

In-amplifier type

This type is built into the amplifier. It outputs a standard analog signal (4 to 20 mA), so it can be directly connected to a linear decision unit, digital panel meter, or the A/D unit of a programmable controller.