|
Particle/Contamination
Real-time Monitoring
Thinking of upgrading from manual
fixed-point particle measurement in your clean environment to a
continuous monitoring solution?
The ZN-PD03-S Particle Sensor (Particle Type) provides continuous
high-precision monitoring at a very low set-up cost.
It is ideal for traceability and fault analysis and substantially
reduces labor expenses.
Combines High-precision Measurement with Continuous Monitoring
Measurement Accuracy to
Rival a Particle Counter?
Top in Class
The Particle Sensor generates air flow
of 2.83 liters per minute through a combination of fully rectified
internal design and high-suction fan. Measurement accuracy is close to
that of a particle counter, thanks to Omron laser-optic design
technology as used in high-precision displacement sensors.
|
Intake air is irradiated
with laser light and the level of scattered light from particles
is measured. |
• Typical air
cleanliness readings from different types of measuring devices
• Cleanliness
levels varied in a CLASS 100 (approx.) environment using FFU air
flow control.
• Particle
sensor measurements taken via scaling. |
Low-maintenance Design
for Continuous Measurement
The maintenance workload is reduced
substantially through a combination of long-lasting fan construction
and intermittent laser mode designed to prolong the life span of the
laser. Maintenance costs are also much lower since the Particle
Sensor
does not need an external pump which tends to require frequent
replacement.
Example of use:
|
Multi-point continuous monitoring in
clean room |
Trend monitoring of manufacturing
equipment |
Ambient Dust Real-time Monitoring
Foreign matter in the production
environment can affect the quality of finished products.
Perhaps your production environment is affected by dust? The largest
form of particles, typically carried by human operators and generated
by machinery.
The ZN-PD50-S Particle Sensor (Dust measurement type) provides the
most simple and effective solution yet for monitoring dust levels.
Measure Dust Levels and
Identify Dust Sources with a Single Unit
Efficient Measurement
of Falling Dust
The combination of a powerful fan and a
funnel-shaped air intake efficiently captures falling dust. A built-in
filter prevents large dust particles from entering the system and
causing internal blockages. The filter is simple to replace.
Dust Catcher Feature
to Identify Dust Sources
Industry First
Double-sided tape on the pull-out Trap
Box captures dust particles. The dust can then be analyzed under a
microscope to determine the source.
Example of use:
|
Trend monitoring in cell
manufacturing production line |
Dust monitoring on paint process |
|
Sitemap
Product Lineup:
