Fiber Laser Marker
last update: June 22, 2017
Item | MX-Z2000H | MX-Z2050H | MX-Z2055H*1 | |
---|---|---|---|---|
Processing
laser |
Type | Fiber laser Wavelength: 1,062nm | ||
Laser class | Class 4 (IEC60825-1) | |||
Average output | 20W (Fiber laser transmitter output) | |||
Laser output mode | Standard mode/EE mode*2 | |||
Repetition frequency | Standard mode 10 to 1,000kHz in 0.1-kHz steps/EE mode*2 10 to 100kHz in 0.1-kHz steps | |||
Pulse-train width(pattern)setting | Standard mode 7.5ns~300ns(15patterns)/EE mode*2 150ns~450ns (3patterns) | |||
Guide laser and
focus pointer |
Type | Semiconductor laser wavelength: 655nm | ||
Laser class | Class 2 (IEC60825-1) | |||
Optical
specifications |
Marking area | 90×90mm | 160×160mm | 160×160mm |
Working distance | 170±10mm | 220±10mm | 220±10mm | |
Scanning
specifications |
Scan speed | 1~12,000mm/s | ||
Marking resolution | 2μm | 4μm | 4μm | |
Detail of marking | Text | original / original2 / OCR-A / OCR-B / SEMI / LM font / True Type font | ||
Bar code | CODE39 / NW-7 / ITF / CODE128 / JAN
GS1 Databar Omni-directional / GS1 Databar Truncated/GS1 Databar Limited / GS1 Databar Expanded |
|||
2D code | QR code / Micro QR code / DataMatrix(ECC200)/ GS1 DataMatrix(ECC200) | |||
shape | Fixed point / Straight line / Rectangle / Circle / Arc | |||
3D shapes | Slope / Step / Cylinder / Truncated Cone / Sphere | |||
Image and CAD | BMP/JPG/PNG/DXF | |||
Settings | No. of data/blocks | Marking data:10,000. ; blocks:2,048 | ||
Text setting | 0.1mm~120mm | |||
Cables | Fiber cable | 4.5m Minimum bending radius: 100mm | ||
Marker head control cable
Marker head power supply cable |
5m Minimum bending radius: 100mm | |||
External
interface*3 |
Terminal block and I/O connector | Terminal block input 20pins(NPN/PNP compatible); terminal block 14pins(NPN/PNP compatible)
I/O connector 37pins(NPN/PNP compatible),interlock terminal I/O: 8pins |
||
Serial communications | RS-232C/RS-422A | |||
Ethernet communication | Ethernet(1000BASE-T/100BASE-TX/10BASE-T) / EtherNet/IP™ | |||
Power supply voltage | 100 to 120VAC,50/60Hz ; 200 to 240VAC,50/60Hz | |||
Over voltage category | CAT Ⅱ | |||
Power consumption | at 100VAC: maxmum 390VA , at 200VAC: maxmum 420VA | |||
Ambient
conditions |
Operating ambient temperature*4,humidity | 0 to 40℃, 35 to 85%RH(no condensation) | ||
Strage ambient temperature,humidity | -10 to 60℃(no freezing) / 35 to 85%RH(no condensation) | |||
Installation environment | Indoor , 3,000m, max | |||
Pollution degree | 2 | |||
Protection structure(head)*5 | IP65 | |||
Coolin method | Forced air cooling | |||
Weight | Marker head Approx.15kg, Controller Approx.25kg | |||
Size | Marker head W140×H230×D415mm(excluding projections), Controller W225×H430×D390mm(excluding projections) | |||
Installation direction | Marker head All directions of up, down, left and right (intake vent on the left side face must not be blecked.)Controller Must be installed vertically. | |||
USB interface*6 | USB memory: Controller front panel, Type A connector, keyboard/mouse:controller back panel ,TypeA connector | |||
Accessories | Marker head controll cable, Marker head power supply cable, System key , Removable terminals(input and output, 1each),
Instruction sheet, CD-ROM(Office editing software*7, User's manual, Setup manual.,Translation table between Japanese and Chinese). Interlock release connector, Cable tie, Waring labels |
Notes
*1 Faster marking for resins and plastics films (1.8x faster than MX-Z2050H, 2.0x faster than MX-Z2000H. In case of the fill marking on a plastic film )
*2 EE mode : Energy Enhanced mode (optional)
*3 There are restrictions on functions and commands that can be used by each external interface. Please check the user's manual before use.
*4 The operating temperature may be limited due to the processing conditions. When using ther laser continuously or close to continuously for laser processing,etc. ,please contact OMRON in advance.
*5 The head of this product is constructed for environmental protection under the conditions specified in IEC 60529(JIS C0920) , and is not guaranteed under any other conditions.
*6 Do not use the USB interfaces for anything other than ther specified applications.
*7 The following environment is required for using the offline editing software and font logo editor
: Computer with a USB 2.0. or 1.1 port , Microsoft Windows® 8/Windows® 7 , Available hard disk space : 1GB, min. Display resolution : 1,024×768, min.
・From the production in end of April 2017, there are some external appearance changes, such as painting the bottom of the head.
last update: June 22, 2017