Indonesia
| Monitoring type | Power supply voltage | Model |
|---|---|---|
| Comprehensive current diagnosis type | 100 to 240 VAC | K6CM-CIMA-EIP |
| 24 VAC/VDC | K6CM-CIMD-EIP |
K6CM
Motor Condition Monitoring Device
Quantifying the status of a three-phase induction motor.
Related Contents
last update: December 3, 2018
K6CM-CIM
List of Models
CT (Order separately)
| Rated primary-side current | Applicable Relay | Model |
|---|---|---|
| 5 A | K6CM-CIM | K6CM-CICB005 |
| 25 A | K6CM-CICB025 | |
| 100 A | K6CM-CICB100 | |
| 200 A | K6CM-CICB200 | |
| 400 A | K6CM-CICB400 | |
| 600 A | K6CM-CICB600 |
Note: A cable for connection is provided with the CT. Select a CT that sets the current of the applicable motor within the
measurement range.
To calculate the current, refer to Comprehensive Current Diagnosis Type Technical Data (Reference) on Data Sheet.
measurement range.
To calculate the current, refer to Comprehensive Current Diagnosis Type Technical Data (Reference) on Data Sheet.
List of Combinations
The K6CM-CIM must be configured in combination with CT.
One sensor must be provided for one main unit.
❍: Can be combined, ---: Cannot be combined
| State monitoring components | ||
|---|---|---|
| K6CM-CIMA-EIP/K6CM-CIMD-EIP | ||
| CT | K6CM-CICB005 | ❍ |
| K6CM-CICB025 | ❍ | |
| K6CM-CICB100 | ❍ | |
| K6CM-CICB200 | ❍ | |
| K6CM-CICB400 | ❍ | |
| K6CM-CICB600 | ❍ | |
K6CM-VBM
List of Models
| Monitoring type | Power supply voltage | Model |
|---|---|---|
| Vibration & temperature type | 100 to 240 VAC | K6CM-VBMA-EIP |
| 24 VAC/VDC | K6CM-VBMD-EIP |
Input part
Vibration & temperature sensor (Order separately)
| Appearance
(pre-amplifier) |
Appearance
(sensor head) |
Attachment part | Applicable Relay | Model |
|---|---|---|---|---|
 |
 |
M6 screw | K6CM-VBM | K6CM-VBS1 |
Note: The vibration and temperature sensor consists of a sensor head and a pre-amplifier.
A magnet is provided for the easy attachment of the vibration and temperature sensor.
Use to determine the position to be measured. Note that measurement accuracy is not guaranteed in the case of
magnet mounting.
A magnet is provided for the easy attachment of the vibration and temperature sensor.
Use to determine the position to be measured. Note that measurement accuracy is not guaranteed in the case of
magnet mounting.
Vibration and temperature sensor Adhesive attachment (option)
| Appearance | Model |
|---|---|
 |
K6CM-VBSAT1 |
List of Combinations
The K6CM-VBM must be configured in combination with the K6CM-VBS1.
One sensor is combined with one main unit.
K6CM-ISM
List of Models
| Monitoring type | Power supply voltage | Model |
|---|---|---|
| Insulation resistance type | 100 to 240 VAC | K6CM-ISMA-EIP |
| 24 VAC/VDC | K6CM-ISMD-EIP |
ZCT (IRT) (Order separately)
| Rated voltage | Through hole dia. (mm) | Applicable Relay | Model |
|---|---|---|---|
| 200 to 480 VAC | 52 dia. | K6CM-ISM | K6CM-ISZBI52 |
Note: ZCT (IRT) is the abbreviation for Zero Current Transfer (Insulation Resistance Transfer).
A cable for connection is provided with the ZCT (IRT).
A cable for connection is provided with the ZCT (IRT).
List of Combinations
The K6CM-ISM must be configured in combination with the ZCT (IRT).
One sensor is combined with one main unit.
EtherNet/IP communication cable recommended parts
Use a Category 5 or higher STP cable (shielded twisted pair cable).
Cable with Connectors
| Item | Recommended
manufacturer |
Cable
length (m) |
Model | |
|---|---|---|---|---|
| Wire Gauge and Number
of Pairs: AWG26, 4-pair Cable Cable Sheath material: LSZH *2 |
Cable with Connectors on
Both Ends (RJ45/RJ45) Standard RJ45 plug type *1 Cable color: Yellow *3  |
OMRON | 0.3 | XS6W-6LSZH8SS30CM-Y |
| 0.5 | XS6W-6LSZH8SS50CM-Y | |||
| 1 | XS6W-6LSZH8SS100CM-Y | |||
| 2 | XS6W-6LSZH8SS200CM-Y | |||
| 3 | XS6W-6LSZH8SS300CM-Y | |||
| 5 | XS6W-6LSZH8SS500CM-Y | |||
| Wire Gauge and Number
of Pairs: AWG22, 2-pair Cable |
Cable with Connectors on
Both Ends (RJ45/RJ45) Rugged RJ45 plug type *1 Cable color: Light blue  |
OMRON | 0.3 | XS5W-T421-AMD-K |
| 0.5 | XS5W-T421-BMD-K | |||
| 1 | XS5W-T421-CMD-K | |||
| 2 | XS5W-T421-DMD-K | |||
| 5 | XS5W-T421-GMD-K | |||
| 10 | XS5W-T421-JMD-K | |||
*1. Cables with standard RJ45 plugs are available in the following lengths: 0.2 m, 0.3 m, 0.5 m, 1 m, 1.5 m, 2 m, 3 m, 5 m,
7.5 m, 10 m, 15 m, 20 m.
Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m.
For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019).
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
*3. Cable colors are available in yellow, green, and blue. The last character of the model changes to "-G" or "-B".
7.5 m, 10 m, 15 m, 20 m.
Cables with rugged RJ45 plugs are available in the following lengths: 0.3 m, 0.5 m, 1 m, 2 m, 3 m, 5 m, 10 m, 15 m.
For details, refer to the Industrial Ethernet Connectors Catalog (Cat. No. G019).
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use.
*3. Cable colors are available in yellow, green, and blue. The last character of the model changes to "-G" or "-B".
Cable/Connector
| Part name | Manufacturer | Model |
|---|---|---|
| Cable | Hitachi Metals, Ltd. | NETSTAR-C5E SA 0.5 × 4P * |
| RJ45 connector | Panduit Corporation | MPS588-C * |
* It is recommended to use the cable and connector in combination described above.
Industrial switching hub (recommended parts)
| Product
name |
Appearance | Specifications | Model | ||
|---|---|---|---|---|---|
| Function | No. of
ports |
Failure detection
function |
|||
| Industrial
switching hub |
 |
Priority control (QoS): EtherNet/IP control
data priority Failure detection: Broadcast storm/ LSI failure detection 10/100BASE-TX, Auto-Negotiation |
3 | × | W4S1-03B |
 |
5 | × | W4S1-05B | ||
| 5 | ❍ | W4S1-05C | |||
last update: December 3, 2018
Top of page
© Copyright OMRON Corporation 2000-2017. All Rights Reserved.