Retroreflective Photomicrosensor with Lens
* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.
last update: September 24, 2012
| Models | EE-SPZ301-A, EE-SPZ401-A | |
|---|---|---|
| Sensing distance *1 | 200 mm ( using E39-R1 reflector) | |
| Light source | GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm | |
| Indicator *2 | Light indicator (red) | |
| Supply voltage | 5 to 24 VDC ±10%, ripple (p-p): 5% max. | |
| Current consumption | Average: 15 mA max., Peak: 50 mA max. | |
| Control output | NPN voltage output Load power supply voltage: 5 to 24 VDC Load current: 80 mA max. OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 1.0 V max. 10 mA load current with a residual voltage of 0.4 V max. |
|
| Response frequency *3 | 100 Hz min. | |
| Ambient illumination | 3,000 lx max. with incandescent light or sunlight on the surface of the receiver | |
|
Ambient temperature range |
Operating: - 10 to +55 ° C Storage: - 25 to +65 ° C |
|
| Ambient humidity range | Operating: 5% to 85% Storage: 5% to 95% |
|
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions | |
| Shock resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions | |
| Degree of protection | IEC IP50 | |
| Connecting method | Special connector (soldering not possible) | |
| Weight (packaged) | Approx. 3 g | |
| Material | Case | Polycarbonate |
| Lens | ||
*1. Operation may not be possible near the sensor.
*2. The indicator is a GaP red LED (peak wavelength: 700 nm).
*3. The response frequency was measured by detecting the following rotating disk.
last update: September 24, 2012