Menu
Industrial Automation
E2KQ-X
Chemical-resistant Proximity Sensor
Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster
Related Contents
Application Solutions
- Features
- Lineup
- Specifications
- Dimensions
- Catalog / Manual / CAD / Software
last update: September 24, 2012
| Model | E2KQ-X10ME1 | E2KQ-X10ME2 | |
|---|---|---|---|
| Sensing distance *1 | 10 mm | ||
| Sensing distance adjustable range | 6 to 10 mm | ||
| Differential travel | 4% to 20% of sensing distance | ||
| Detectable object | Conductors and dielectrics | ||
| Standard sensing object | Grounded metal plate: 50 × 50 × 1 mm | ||
| Response frequency | 35 Hz | ||
|
Power supply voltage (operating voltage range) |
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
| Current consumption | 15 mA max. | ||
| Control output | Load current | 100 mA | |
| Residual voltage | 1.5 V max. (Load current: 100 mA, Cable length: 2 m) | ||
| Indicators | Detection indicator (red) | ||
|
Operation mode (with sensing object approaching) *2 |
NO | NC | |
| Protection circuits | Reverse polarity protection, Surge suppressor | ||
| Ambient temperature range | Operating: -10 to 55°C, Storage: -25 to 55°C (with no icing or condensation) | ||
| Ambient humidity range | Operating/storage: 35% to 85% (with no condensation) | ||
| Temperature influence | ±15% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | ||
| Voltage influence | ±2% max. of sensing distance at rated voltage at rated voltage ±20% | ||
| Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||
| Dielectric strength | 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case | ||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
| Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | ||
| Degree of protection | IP66 (IEC), in-house standards: oil-resistant | ||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
| Weight (packed state) | Approx. 150 g | ||
| Materials |
Case, sensing surface |
Fluorine resin | |
| Clamping nuts | |||
| Cable | Vinyl chloride | ||
| Accessories | Adjustment screwdriver, Instruction manual | ||
*1. The above values are sensing distances for the standard sensing object. Refer to Engineering Data on the Data
Sheet for other materials.
*2. Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
Sheet for other materials.
*2. Refer to the timing charts under I/O Circuit Diagrams on Data Sheet for details.
last update: September 24, 2012
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.