E6A2-C Incremental 25-mm-dia. Rotary Encoder/Specifications | OMRON Industrial Automation Indonesia

Model		E6A2-CWZ3E	E6A2-CWZ3C	E6A2-CWZ5C
Power supply voltage		5 VDC -5% to 12 V +10%, ripple (p-p): 5% max.		12 VDC -10% to 24 VDC +15%, ripple (p-p): 5% max.
*Current consumption 1**		50 mA max.	30 mA max.
Resolution (pulses/rotation)		100, 200, 360, 500
Output phases		Phases A, B, and Z
Output configuration		Voltage output	NPN open-collector output
Output capacity		Output resistance: 2 kΩ Output current: 20 mA max. Residual voltage: 0.4 V max. (Output current: 20 mA max.)	Applied voltage: 30 VDC max. Sink current: 30 mA max. Residual voltage: 0.4 V max. (at sink current of 30 mA)
Maximum response frequency *2		30 kHz
Phase difference between outputs		Phase difference between phases A and B: 90°±45°
Output duty factor		---
Rise and fall times of output		1.0 μs max. (Cable length: 500 mm, Sink current: 10 mA)	1.0 μs max. (Cable length: 500 mm, Control output voltage: 5 V, Load resistance: 1 kΩ)
Starting torque		1 mNm max.
Moment of inertia		1 × 10^-7 kgm² max.
Shaft loading	Radial	10 N
Shaft loading	Thrust	50 N
Maximum permissible speed		5,000 r/min
Ambient temperature range		Operating: -10 to 55°C (with no icing), Storage: -25 to 80°C (with no icing)
Ambient humidity range		Operating/storage: 35% to 85% (with no condensation)
Insulation resistance		20 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 3 times each in X, Y, and Z directions
*Degree of protection 3**		IEC 60529 IP50
Connection method		Pre-wired Models (Standard cable length: 500 mm)
Material		Case: Aluminum alloy, Main unit: Aluminum, Shaft: SUS420J2, Mounting Bracket: Galvanized iron
Weight (packed state)		Approx. 35 g
Accessories		Coupling, Servo Mounting Bracket (provided with the E6A2-CWZ[]), Hexagonal wrench, Instruction manual

Model		E6A2-CW3E	E6A2-CW3C	E6A2-CW5C
Power supply voltage		5 VDC -5% to 12 V +10%, ripple (p-p): 5% max.		12 VDC -10% to 24 VDC +15%, ripple (p-p): 5% max.
*Current consumption 1**		30 mA max.	20 mA max.
Resolution (pulses/rotation)		100, 200, 360, 500
Output phases		Phases A and B
Output configuration		Voltage output	NPN open-collector output
Output capacity		Output resistance: 2 kΩ Output current: 20 mA max. Residual voltage: 0.4 V max. (Output current: 20 mA max.)	Applied voltage: 30 VDC max. Sink current: 30 mA max. Residual voltage: 0.4 V max. (at sink current of 30 mA)
Maximum response frequency *2		30 kHz
Phase difference between outputs		Phase difference between phases A and B: 90°±45°
Output duty factor		---
Rise and fall times of output		1.0 μs max. (Cable length: 500 mm, Sink current: 10 mA)	1.0 μs max. (Cable length: 500 mm, Control output voltage: 5 V, Load resistance: 1 kΩ)
Starting torque		1 mNm max.
Moment of inertia		1 × 10^-7 kgm² max.
Shaft loading	Radial	10 N
Shaft loading	Thrust	50 N
Maximum permissible speed		5,000 r/min
Ambient temperature range		Operating: -10 to 55°C (with no icing), Storage: -25 to 80°C (with no icing)
Ambient humidity range		Operating/storage: 35% to 85% (with no condensation)
Insulation resistance		20 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 3 times each in X, Y, and Z directions
*Degree of protection 3**		IEC 60529 IP50
Connection method		Pre-wired Models (Standard cable length: 500 mm)
Material		Case: Aluminum alloy, Main unit: Aluminum, Shaft: SUS420J2, Mounting Bracket: Galvanized iron
Weight (packed state)		Approx. 35 g
Accessories		Coupling, Servo Mounting Bracket (provided with the E6A2-CWZ[]), Hexagonal wrench, Instruction manual

Model		E6A2-CS3E	E6A2-CS3C	E6A2-CS5C
Power supply voltage		5 VDC -5% to 12 V +10%, ripple (p-p): 5% max.		12 VDC -10% to 24 VDC +15%, ripple (p-p): 5% max.
*Current consumption 1**		30 mA max.	20 mA max.
Resolution (pulses/rotation)		10, 20, 60, 100, 200, 300, 360, 500
Output phases		Phase A
Output configuration		Voltage output	NPN open-collector output
Output capacity		Output resistance: 2 kΩ Output current: 20 mA max. Residual voltage: 0.4 V max. (Output current: 20 mA max.)	Applied voltage: 30 VDC max. Sink current: 30 mA max. Residual voltage: 0.4 V max. (at sink current of 30 mA)
Maximum response frequency *2		30 kHz
Phase difference between outputs		---
Output duty factor		50±25%
Rise and fall times of output		1.0 μs max. (Cable length: 500 mm, Sink current: 10 mA)	1.0 μs max. (Cable length: 500 mm, Control output voltage: 5 V, Load resistance: 1 kΩ)
Starting torque		1 mNm max.
Moment of inertia		1 × 10^-7 kgm² max.
Shaft loading	Radial	10 N
Shaft loading	Thrust	50 N
Maximum permissible speed		5,000 r/min
Ambient temperature range		Operating: -10 to 55°C (with no icing), Storage: -25 to 80°C (with no icing)
Ambient humidity range		Operating/storage: 35% to 85% (with no condensation)
Insulation resistance		20 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		500 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 3 times each in X, Y, and Z directions
*Degree of protection 3**		IEC 60529 IP50
Connection method		Pre-wired Models (Standard cable length: 500 mm)
Material		Case: Aluminum alloy, Main unit: Aluminum, Shaft: SUS420J2, Mounting Bracket: Galvanized iron
Weight (packed state)		Approx. 35 g
Accessories		Coupling, Servo Mounting Bracket (provided with the E6A2-CWZ[]), Hexagonal wrench, Instruction manual

*1. An inrush current of approximately 9 A will flow for approximately 0.3 ms when the power is turned ON.
*2. The maximum electrical response speed is determined by the resolution and maximum response frequency as
follows:
　 486_sp_1

This means that the E6A2-C Rotary Encoder will not operate electrically if its speed exceeds the maximum electrical
response speed.
*3. No protection is provided against water or oil.

E6A2-C

Compact Encoder with External Diameter of 25 mm

Product Category