Industrial Automation

XW2Z (Standard-type)

Connecting Cables for Connector-Terminal Block Conversion Units (Shielded)

Connect Connector-Terminal Block Conversion Units (XW2[]) to I/O Units for Programmable Controllers with one touch.

last update: November 21, 2022

Rated current	1 A
Rated voltage	125 VAC 30 VDC
Contact resistance	20 mΩ max. (at 20 mV, 100 mA max.) *1
Insulation resistance	100 MΩ min. (at 500 VDC)
Dielectric strength	500 VAC for 1 min (leakage current: 1 mA max.) *2
Ambient operating temperature	-20 to +75°C (with no condensation or icing) *3

Note: This cable is for fixed parts. Do not use it for moving parts.
*1. Contact resistance for the Connector.
*2. Dielectric strength for the Connector.
*3. However, when bending the cable to perform wiring, maintenance, and other work, do so within the temperature range of 0 to 75°C in consideration of severing of the cable.

last update: November 21, 2022

Product Category

Power Supplies / In Addition
- Wiring Systems
  - Connector-Terminal Block Conversion Units
    - XW2K
    - XW2K-COM
    - XW2R (PLCs)
    - XW2R (General-purpose devices)
    - XW2D
    - XW2Z (Standard-type)
    - XW2Z-[][][]P-V / S-V / S-CV / T

Top of page