Main :: Safety Solutions :: Relays with Forcibly Guided Contacts

Model	Appearance	Features	Safety Category	Approved Standard No.	Agency
G7SA Relays with Forcibly Guided Contacts	(see note 2)	• Relays with forcibly guided contacts. (EN50205 Class A, certified by VDE) • Slim, compact design. • 4- and 6-pole models available. • The Relay's terminal arrangement simplifies PWB pattern design. • Reinforced insulation between inputs and outputs. Reinforced insulation some poles of different polarity.	1 *	EN61810-1 EN50205 UL508 CSA C22.2 No.14	• VDE • UL • CSA
G7SB Relays with Forcibly Guided Contacts	(see note 2)	• Relays with forcibly guided contacts (EN50205 Class A, certified by VDE). • Low profile - only 14.5 mm. • Coil power consumption is 360 mW for 4 pole model or 500 mW for 6 pole model. • Four-pole and six-pole Relays are available. • The Relay's terminal arrangement simplifies PWB pattern design. • Reinforced insulation	1 *	EN61810-1 EN50205 UL508 CSA C22.2 No.14	• VDE • UL
G7S Relays with Forcibly Guided Contacts	(see note 2)	• Relays with forcibly guided contacts (EN50205 Class A, certified by VDE) • Suitable for obtaining machine CE marking. • Track- and back-mounting Sockets are available.	1 *	EN61810-1 EN50205 UL508 CSA C22.2 No.14	• VDE • UL • CSA
G7S-[]-E Relays with Forcibly Guided Contacts	(see note 2)	• Switches up to 10 A. • Forcibly guided contacts ensure safety. (EN50205 Class A, certified by VDE) • Suitable for obtaining machine CE marking. • Most suitable for safety circuits in production machinery. • Track- and back-mounting Sockets are available.	1 *	EN61810-1 EN50205 UL508 CSA C22.2 No.14	• VDE • UL • CSA
G7Z Power Relays		• Switching possible with 40-A current. • The maximum load capacity of 160 A when using 4-pole parallel connections. • Mirror contact construction ensure safety. (Mirror contact construction in the Relay and auxiliary contact block, EN60947-4-1 certification) • A design with a small number of openings makes it difficult for dust or foreign matter to enter. • Ideal for supply power to industrial inverters, servo drivers, and other devices, and switching power to motors and other equipment.	1 *	EN60947-4-1 UL508 CSA C22.2 No.14	• TÜV Rheinland • UL (cUL)

Note:

1. The safety category refers to the highest applicable category that can be selected when a safety block is created for a control system. It is not the safety category applicable to the safety component itself.

2. The G7SA, G7SB, G7S, and G7S-[]-E have VDE certification and conform to the EC Low Voltage Directive. They do not, however, have the CE Marking authorized in accordance with European guidelines.

3. Production of the P7S-A10 and P7S-14A have been discontinued at the end of March 2007. The recommended substitute will be the P7S-14F-END.
Refer to Precautions for All Relays with Forcibly Guided Contacts for detail.
When the equipment or machine in which the product is used is to acquire the CE Marking, the manufacturer's declaration of
conformity for the G7SA, G7SB, G7S, and G7S-[]-E can be used to prove VDE compliance.

* Refer to the Safety Circuit Examples in the Safety Components Technical Guide (Cat. No. Y107) for information on building safety circuits using Relays with Forcibly Guided Contacts.

top