E3X-DRT21-S VER.3

Fiber Amplifier Sensor Communication Unit

E3X-DRT21-S VER.3

The DeviceNet Communication Unit That Simplifies Managing Sensor Settings

* Information in this page is a reference that you created on the basis of information in the product catalog before the end of production, may be different from the current situation, such as goods for / supported standards options / price / features of the product. Before using, please check the compatibility and safety system.

last update: March 1, 2022

Item		Description
Communications Method		Sets parameters using Explicit messages
Communi- cations functions	Remote I/O Communications Slave function	Edits slave device parameters, enables device monitor functions
	Message Communications function	E3X-MC11-SV2 can be connected
	Configurator	DeviceNet communications
Mobile Console connection		Monitors ON/OFF output, status, incident light level (digital display data)
Power supply		Supplied from the DeviceNet communications connector (power is also supplied to all connected Sensors through Wire-reducing Connectors)
Maximum connectable Sensors *1		For remote I/O communications 1-CH mode 2: 13 For remote I/O communications 2-CH mode 3 or for remote I/O communications 2-CH mode + detection level monitoring mode *4: 16
*Connectable Sensors 5**		E3X-DA-S Series 7 or E3X-MDA Series 8 Digital Fiber Sensor E3C-LDA Series Laser Photoelectric Sensor with Separate Digital Amplifier *9 E2C-EDA High-resolution Digital Proximity Sensor with Separate Amplifier (use connector-type Amplifier Units and the E3X-CN02 Cordless Slave Connector)
Power supply voltage		11 to 25 VDC
*Current consumption 6**		70 mA max.
Ambient operating temperature		-20 to 55°C
Ambient operating humidity		30% to 85% (with no condensation)
Storage temperature		-30 to 70°C
Dimensions (mm)		30 x 34.6 x 71.3 (W x H x D)
Weight (packed state)		Approx. 150 g

*1. When any of the following Sensors is connected, two words are allocated per Sensor and each Sensor is counted as
two Sensors for the number of connected Sensors.
E3X-DA[]-S ([]: 7/9), E3X-DA[]TW-S ([]: 6/8), E3X-MDA[] ([]: 6/8), E3C-LDA[] ([]: 6/8), E2C-EDA[] ([]: 6/8)
*2. Communications is possible for the ON/OFF output data from 13 Units. One word is allocated as the input area in the
Master.
*3. Communications is possible for the ON/OFF output data from 16 Units and the number of connected Sensors. Two
word sare allocated as the output area in the Master.
*4. Communications is possible for the ON/OFF output data from 16 Units, the number of connected Sensors, and the
detection levels for the connected Sensors.
Two words are allocated as the input area and one word is allocated for the number of connected Sensors in the
Master.
*5. Connection cannot be performed if the response speed of the Sensor is set to super-high-speed mode.
*6. This does not include the current supplied to the Sensor.
*7. E3X-DA[]-S Series in this catalog have been discontinued at the end of March 2017 and end of March 2019.
*8. E3X-MDA Series will be accepted until the end of August 2021.
*9. E3C-LDA Series will be accepted until the end of February 2022.

last update: March 1, 2022

Product Category

Sensors
- Fiber Sensors
  - Discontinued
    - E3X-DRT21-S VER.3

Top of page