Menu
Industrial Automation
E3X-SD / NA
Simple Fiber Amplifier Unit
Simple and Affordable Fiber Amplifier Units
Related Contents
Application Solutions
last update: March 14, 2013
Fiber Amplifier Units
Digital Display and Direct Key Setting
| Item | Appearance | Connection method | Ratings and
Specifications |
Model | |
|---|---|---|---|---|---|
| NPN output | PNP output | ||||
| Standard models |
 |
Pre-wired (2 m) | --- | E3X-SD21 2M | E3X-SD51 2M |
 |
Wire-saving connector | E3X-SD7 | E3X-SD9 | ||
Bar Display and Adjuster Setting
| Item | Appearance | Connection method | Ratings and
Specifications |
Model | |
|---|---|---|---|---|---|
| NPN output | PNP output | ||||
| Standard models |
 |
Pre-wired (2 m) | --- | E3X-NA11 2M | E3X-NA41 2M |
 |
Wire-saving connector | E3X-NA6 | E3X-NA8 | ||
| High-speed
detection models |
 |
Pre-wired (2 m) | Response time:
20 μs |
E3X-NA11F 2M | E3X-NA41F 2M |
| Water-resistant
models |
 |
Pre-wired (2 m) | Degree of
protection: IP66 |
E3X-NA11V 2M | E3X-NA41V 2M |
 |
Connector (M8) | E3X-NA14V | E3X-NA44V | ||
*1. An Amplifier Unit Connector (sold separately) is required.
*2. A Sensor I/O Connector (sold separately) is required.
*2. A Sensor I/O Connector (sold separately) is required.
Accessories (sold separately)
Amplifier Unit Connectors (Required for models for Wire-saving Connectors.)
Note: Protective seals provided.
| Item | Appearance | Cable length | No. of conductors | Model |
|---|---|---|---|---|
| Master Connector |
 |
2 m | 3 | E3X-CN11 |
| Slave Connector |
 |
1 | E3X-CN12 |
Ordering Precautions for Amplifier Units Connectors
A Connector is not provided with the Amplifier Unit.
Refer to the tables at the right when placing an order.
| Fiber Amplifier Units | Applicable Connectors (sold separately) | |||
|---|---|---|---|---|
| Type | NPN | PNP | Master Connector | Slave Connector |
| Standard models | E3X-SD7 | E3X-SD9 | E3X-CN11 (3-wire) | E3X-CN12 (1-wire) |
| E3X-NA6 | E3X-NA8 | |||
When Using 5 Amplifier Units
| 5 Fiber Amplifier Units | + | 1 Master Connector + 4 Slave Connectors |
Sensor I/O Connectors (Required for models with M8 Connectors.)
(Models for Connectors: A Connector is not provided with the Amplifier Unit. Be sure to order a Connector separately.)
| Size | Cable specifications | Appearance | Cable type | Model | ||
|---|---|---|---|---|---|---|
| M8 | Standard cable | Straight connector |
 |
2 m | Four-conductor cable | XS3F-M421-402-A |
| 5 m | XS3F-M421-405-A | |||||
| L-shaped connector |
 |
2 m | XS3F-M422-402-A | |||
| 5 m | XS3F-M422-405-A | |||||
Mounting Brackets
A Mounting Bracket is not provided with the Fiber Amplifier Unit. Order a Mounting Bracket separately if required.
| Appearance | Applicable models | Model | Quantity |
|---|---|---|---|
 |
E3X-SD[]
E3X-NA[] E3X-NA[]F |
E39-L143 | 1 |
 |
E3X-NA[]V | E39-L148 |
End Plate
End Plates are not provided with the Fiber Amplifier Unit. Order End Plates separately if required.
| Appearance | Model | Quantity |
|---|---|---|
 |
PFP-M | 1 |
last update: March 14, 2013
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.