Industrial Automation

Login / Signup

Industrial Automation

EE-SPX613

Pipe-mounting Liquid Level Photomicrosensor with Built-in Amplifier

EE-SPX613

Liquid Level Photomicrosensor with operation mode and sensitivity selectors for easy application.

last update: September 24, 2012

Material	Cover	Polycarbonate
Models		EE-SPX613
Applicable pipe		Any 6- to 13-mm-diameter pipe with a wall thickness of 1 mm that is made of FEP or any other material as transparent as FEP.
Sensing object		Liquids in pipes (High-viscosity liquids or liquids with floating materials may not be detected.)
Light source		GaAs infrared LED with a peak wavelength of 940 nm
Indicator		Light indicator GaP (Red LED: Peak wavelength of 700 nm)
Supply voltage		12 to 24 VDC ±10%, ripple (p-p): 5% max.
Current consumption		Average: 30 mA max., Peak: 80 mA max.
Control output		NPN open collector: Load power supply voltage: 5 to 24 VDC Load current: 100 mA max. OFF current: 0.5 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max.
Ambient illumination		3,000 lx max. with incandescent light or sunlight on the surface of the receiver
Ambient temperature range		Operating: - 10 to +55 ° C Storage: - 25 to +65 ° C (with no icing or condensation)
Ambient humidity range		Operating: 5% to 85% Storage: 5% to 95% (with no condensation)
Vibration resistance		Destruction: 10 to 500 Hz, 1.0-mm single amplitude or 150 m/s² in X, Y, and Z directions 3 times and for 11 min each
Shock resistance		Destruction: 500 m/s² for 3 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP50
Connecting method		Pre-wired (Standard length: 1 m)
Weight (packed state)		Approx. 55 g
Material	Case	Polycarbonate
Accessories		Support belt (2), slip protection tube (2), Instruction Manual

last update: September 24, 2012

Product Category

Sensors
- Photomicro Sensors
  - For Special Applications
    - EE-SPX613
    - EE-SPY801 / 802
    - EE-SA701 / 801

Top of page