Industrial Automation

DZ

Special-purpose Basic Switch

DPDT Basic Switch for Two Independent Circuit Control

last update: October 10, 2012

Ratings

Rated voltage	Non-inductive load (A)				Inductive load (A)
	Resistive load		Lamp load		Inductive load		Motor load
	NC	NO	NC	NO	NC	NO	NC	NO
125 VAC 250 VAC	10 10		2 1.5	1 0.7	6 4		3 2	1.5 1
8 VDC 14 VDC 30 VDC 125 VAC 250 VDC	10 10 10 0.5 0.25		3 3 3	1.5 1.5 1.5	6 6 4 0.05 0.03		5 5 3	2.5 2.5 1.5
8 VDC 14 VDC 30 VDC 125 VAC 250 VDC	10 10 10 0.5 0.25		0.5 0.25		6 6 4 0.05 0.03		0.05 0.03

Note: 1. The above values are for steady-state current.
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The ratings values apply under the following test conditions:
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%RH
(3) Operating frequency: 20 operations/min

Characteristics


Operating speed		0.1 mm to 1 m/s *1
Operating frequency	Mechanical	240 operations/min
Operating frequency	Electrical	20 operations/min
Insulation resistance		100 MΩ min. (at 500 VDC)
Contact resistance		15 mΩ max. (initial value)
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min between non-continuous terminals 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and non-current-carrying metal part, and between current-carrying metal part and ground and between switches


Vibration resistance	Malfunction	10 to 55 Hz, 1.5-mm double amplitude *2
Shock resistance	Destruction	1,000 m/s² max.
Shock resistance	Malfunction	300 m/s² max. 1 2
Durability	Mechanical	1,000,000 operations min.
Durability	Electrical	500,000 operations min.
Degree of protection		IP00
Degree of protection against electric shock		Class I
Degree of protection against electric shock		Class I
Proof tracking index (PTI)		175
Ambient operating temperature		-25°C to 80°C (with no icing)
Ambient operating humidity		35% to 85%RH
Weight		Approx. 30 to 50 g

*1. The values are for pin plunger models. (Contact your OMRON representative for other models.)
*2. Malfunction: 1 ms max.

Contact Specifications

Contacts	Material	Silver alloy
Contacts	Gap (standard value)	0.5 mm
Inrush current	NC	30 A max.
Inrush current	NO	15 A max.

last update: October 10, 2012

Product Category

Switches
- Basic Switches
  - Basic Switches (Z-Size)

Top of page