D4C

Note: 1. Models are available separately with resistance to viscous oils (oil drain holes are provided), but only with
              Plunger Models. Add "-M" to the model number (example: D4C-1202 would be D4C-1202-M). Ask your nearest
              OMRON representative for details.
           2. Switches with variable roller levers are also available. Ask your nearest OMRON representative for details.
*1. Oil-resistant vinyl cabtire cables; approved by EN and IEC.
*2. Ordinary vinyl cabtire cables.
*3. Switches with SJT(O) Cables (cables approved by UL and CSA) are approved by UL and CSA.

Note: Ask your nearest OMRON representative for information on Switching with approved international standards.
*1. Oil-resistant vinyl cabtire cables; approved by EN and IEC.
*2. Ordinary vinyl cabtire cables.

Note: 1. M1J models are also available. Contact your OMRON sales representative for further information.
         2. Of the above model numbers, some with special specifications are not registered.

* Vinyl cabtire cable with excellent oil resistance.
Note: Silicon rubber is used to increase resistance to the environment. Silicon rubber, however, can generate silicon gas.
          (This can occur at room temperature, but the amount of silicon gas generated increases at higher temperatures.)
          Silicon gas will react as a result of arc energy and form silicon oxide (SiO₂). If silicon oxide accumulates on the
          contacts, contact interference can occur and can interfere with the device. Before using a Switch, test it under actual
          application conditions (including the environment and operating frequency) to confirm that no problems will occur in
          actual.

Note: 1. The model numbers for heads are of the form D4C-00[][], with the numbers in the squares indicating the type of
              actuator.
           2. Actuators for plunger models, plastic rod models, and center roller lever models cannot be ordered individually.
                They must be ordered together with the head.