Menu
Industrial Automation
CK3W-PD048
Power Supply Unit
Supplies power to the CK3M Controller
Related Contents
Application Solutions
last update: March 14, 2022
Applicable standards
Ask your OMRON representative for the most recent applicable standards for each model.
Power Supply Unit
The models and outline of specifications are given below.
| Product name | Specifications | Model |
|---|---|---|
| Power Supply Unit | Rated output voltage: 5 VDC/24 VDC
Maximum output power: 5 VDC 23 W, 24 VDC 55 W |
CK3W-PD048 |
Applicable Wires
Using Ferrules
If you use ferrules, attach the twisted wires to them.
Observe the application instructions for your ferrules for the wire stripping length when attaching ferrules.
Always use plated one-pin ferrules. Do not use unplated ferrules or two-pin ferrules.
The applicable ferrules, wires, and crimping tools are listed in the following table.
| Manufacturer | Ferrule model | Applicable wire
(mm2 (AWG)) |
Crimping Tool
(applicable wire size given in parentheses) |
|---|---|---|---|
| Phoenix Contact | AI0,25-8 | 0.25 (#24) | Phoenix Contact
CRIMPFOX 6 (0.25 to 6 mm2, AWG24 to 10) |
| AI0,5-8 | 0.5 (#20) | ||
| AI0,75-8 | 0.75 (#18) | ||
| AI1,0-8 | 1.0 (#18) | ||
| AI1,5-8 | 1.5 (#16) | ||
| Weidmüller | H0.25/12 | 0.25 (#24) | Weidmüller
PZ6 Roto (0.14 to 6 mm2, AWG26 to 10) |
| H0.34/12 | 0.34 (#22) | ||
| H0.5/14 | 0.5 (#20) | ||
| H0.75/14 | 0.75 (#18) | ||
| H1.0/14 | 1.0 (#18) | ||
| H1.5/14 | 1.5 (#16) |
Using Twisted or Solid Wires
| Wire type | Conductor cross-sectional area | Conductor length
(stripping length) |
|---|---|---|
| Solid wire | 0.2 to 4 mm2 | 8 mm |
| Twisted wire | 0.2 to 2.5 mm2 | 8 mm |
Required Tools
Use a flat-blade screwdriver to remove wires.
The recommended screwdriver is as follows.
| Model | Manufacturer |
|---|---|
| SZF 0-0,4X2,5 | Phoenix Contact |
last update: March 14, 2022
Top of page
Products
Menu
About Us
Menu
Solutions
Menu
Privacy
Menu
Services
Menu
Resources
Menu
© Copyright OMRON Corporation 2000-2020. All Rights Reserved.