Page top

Industrial Automation

Industrial Automation

EE-SX47 / SX67

Slot-type Photomicrosensor with connector or pre-wired models (Non-modulated)*1

EE-SX47 / SX67

Global Standard Slot-type photomicrosensors with 50- to 100-mA direct switching capacity.

Type Standard L-shaped T-shaped,
slot center 7 mm
T-shaped,
slot center 10 mm
NPN
models
Connector models EE-SX670
EE-SX670A
EE-SX470
EE-SX671
EE-SX671A
EE-SX471
EE-SX672
EE-SX672A
EE-SX472
EE-SX675
Pre-wired models EE-SX670-WR EE-SX671-WR EE-SX672-WR EE-SX675-WR
PNP
models
Connector models EE-SX670P
EE-SX670R
EE-SX671P
EE-SX671R
EE-SX672P
EE-SX672R
EE-SX675P
Pre-wired models EE-SX670P-WR EE-SX671P-WR EE-SX672P-WR EE-SX675P-WR
Sensing distance 5 mm (slot width)
Sensing object Opaque: 2 × 0.8 mm min.
Differential distance 0.025 mm
Light source Infrared LED with a peak wavelength of 940 nm
Indicator *1 Light indicator (red) (turns ON when light is interrupted for models with A or R suffix)
Supply voltage 5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption 12 mA max.
Control output NPN open collector:
5 to 24 VDC, 100 mA max.
100 mA load current with a residual voltage of 0.8 V max.
40 mA load current with a residual voltage of 0.4 V max.
OFF current (leakage current): 0.5 mA max.
PNP open collector:
5 to 24 VDC, 50 mA max.
50 mA load current with a residual voltage of 1.3 V max.
OFF current (leakage current): 0.5 mA max.
Protection circuits Load short circuit protection
Response frequency *2 1 kHz min. (3 kHz average)
Ambient illumination 1,000 lx max. with fluorescent light on the surface of the receiver.
Ambient temperature range Operating: - 25 to +55 °C, Storage: - 30 to +80 °C (with no icing or condensation)
Ambient humidity range Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation)
Vibration resistance Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2)
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IEC60529 IP50
Connecting method Connector Models (direct soldering possible), Pre-wired Models (Standard cable length:
1 m), Models with Connectors (Standard cable length: 0.1 m)
Weight Connector models Approx. 3.1 g Approx. 3 g Approx. 2.4 g Approx. 2.7 g
Pre-wired models Approx. 18.9 g Approx. 17.3 g Approx. 17.8 g Approx. 18.3 g
Material Case Polybutylene phthalate (PBT)
Cover Polycarbonate
Emitter/receiver

Type Close-mounting F-shaped R-shaped
NPN
models
Connector models EE-SX673
EE-SX673A
EE-SX473
EE-SX674
EE-SX674A
EE-SX474
EE-SX676 EE-SX677
Pre-wired models EE-SX673-WR EE-SX674-WR EE-SX676-WR EE-SX677-WR
PNP
models
Connector models EE-SX673P
EE-SX673R
EE-SX674P
EE-SX674R
EE-SX676P EE-SX677P
Pre-wired models EE-SX673P-WR EE-SX674P-WR EE-SX676P-WR EE-SX677P-WR
Sensing distance 5 mm (slot width)
Sensing object Opaque: 2 × 0.8 mm min.
Differential distance 0.025 mm
Light source Infrared LED with a peak wavelength of 940 nm
Indicator *1 Light indicator (red) (turns ON when light is interrupted for models with A or R suffix)
Supply voltage 5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumption 12 mA max.
Control output NPN open collector:
5 to 24 VDC, 100 mA max.
100 mA load current with a residual voltage of 0.8 V max.
40 mA load current with a residual voltage of 0.4 V max.
OFF current (leakage current): 0.5 mA max.
PNP open collector:
5 to 24 VDC, 50 mA max.
50 mA load current with a residual voltage of 1.3 V max.
OFF current (leakage current): 0.5 mA max.
Protection circuits Load short circuit protection
Response frequency *2 1 kHz min. (3 kHz average)
Ambient illumination 1,000 lx max. with fluorescent light on the surface of the receiver.
Ambient temperature range Operating: -25 to +55°C, Storage: -30 to +80°C (with no icing or condensation)
Ambient humidity range Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation)
Vibration resistance Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2)
1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection IEC60529 IP50
Connecting method Connector Models (direct soldering possible), Pre-wired Models (Standard cable length:
1 m), Models with Connectors (Standard cable length: 0.1 m)
Weight Connector models Approx. 2.3 g Approx. 3 g Approx. 2.2 g Approx. 2.2 g
Pre-wired models Approx. 16.8 g Approx. 17.1 g Approx. 16.9 g Approx. 16.9 g
Material Case Polybutylene phthalate (PBT)
Cover Polycarbonate
Emitter/receiver

EE-SX47 / SX67 Specifications 3

*1. The indicator is a GaP red LED (peak wavelength: 690 nm).
*2. The response frequency was measured by detecting the rotating disk shown at the right.