Smart Proximity Sensor
last update: February 2, 2018
Type | Appearance | Sensing
Distances |
Repeat
accuracy |
Cable specification | Model | |
---|---|---|---|---|---|---|
Shielded | Cylindrical
![]() |
3 dia. × 18 mm | 0.6 mm | 1 μm | Free cutting *2 | E2NC-EDR6-F |
5.4 dia. × 18 mm | 1 mm | 1 μm | Standard *2 | E2NC-ED01 | ||
Free cutting *2 | E2NC-ED01-F | |||||
With Protective
Spiral Tube *1*2 |
E2NC-ED01-S | |||||
8 dia. × 22 mm | 2 mm | 2 μm | Standard *2 | E2NC-ED02 | ||
Free cutting *2 | E2NC-ED02-F | |||||
With Protective
Spiral Tube *1*2 |
E2NC-ED02-S | |||||
Screw
![]() |
M10 × 22 mm | 2 mm | 2 μm | Standard *2 | E2NC-EM02 | |
Free cutting *2 | E2NC-EM02-F | |||||
With Protective
Spiral Tube *1*2 |
E2NC-EM02-S | |||||
Flat
![]() |
30 × 14 × 4.8 mm | 5 mm | 2 μm | Standard *2 | E2NC-EV05 | |
Free cutting *2 | E2NC-EV05-F | |||||
With Protective
Spiral Tube *1*2 |
E2NC-EV05-S | |||||
Unshielded | Screw
![]() |
M18 × 46.3 mm | 7 mm | 5 μm | Standard *2 | E2NC-EM07M |
Free cutting *2 | E2NC-EM07M-F | |||||
With Protective
Spiral Tube *1*2 |
E2NC-EM07M-S | |||||
Heat-
resistant |
Screw
![]() |
M12 × 22 mm | 2 mm | 2 μm | Standard *2 | E2NC-EM02H |
Type | Appearance | Connection method | Input/output | Model | |
---|---|---|---|---|---|
NPN output | PNP output | ||||
Advanced models | ![]() |
Pre-wired (2 m) | 2 outputs + 1 input | E2NC-EA21 2M | E2NC-EA51 2M |
![]() |
Wire-saving Connectors | 2 outputs | E2NC-EA7TW | E2NC-EA9TW | |
![]() |
Wire-saving Connectors | 1 output + 1 input | E2NC-EA7 | E2NC-EA9 | |
Model for Sensor
Communications Unit * |
![]() |
Connector for Sensor
Communications Unit |
--- | E2NC-EA0 | |
![]() |
Connector for Sensor
Communications Unit Pre-wired (2 m) |
1 output | E2NC-EA10 2M | E2NC-EA40 2M |
* A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately.
*Protective stickers are provided.
Type | Appearance | Cable length | No. of conductors | Model | Applicable Amplifier Units |
---|---|---|---|---|---|
Master Connector | ![]() |
2 m | 4 | E3X-CN21 | E2NC-EA7TW
E2NC-EA9TW E2NC-EA7 E2NC-EA9 |
Slave Connector | ![]() |
2 | E3X-CN22 |
Two End Plates (PFP-M) are provided with the Sensor Communications Unit.
End Plates (PFP-M and E39-EP1) are not provided with the Amplifier Unit. They must be ordered separately as required.
Appearance | Model | Quantity | Applicable Amplifier Units |
---|---|---|---|
![]() |
PFP-M | 1 | E2NC-EA21
E2NC-EA51 E2NC-EA7[][] E2NC-EA9[][] E2NC-EA0 |
![]() |
E39-EP1 | 1 | E2NC-EA10
E2NC-EA40 |
Type | Appearance | Model |
---|---|---|
Sensor Communications Unit for EtherCAT | ![]() |
E3NW-ECT |
Sensor Communications Unit for CC-Link | ![]() |
E3NW-CCL |
Distributed Sensor Unit * | ![]() |
E3NW-DS |
Refer to your OMRON website for details.
* The Distributed Sensor Unit can be connected to any of the Sensor Communications Units.
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
CC-Link is a registered trademark of Mitsubishi Electric Corporation. The trademark is managed by the CC-Link Partner Association.
last update: February 2, 2018