Page top

Industrial Automation

Industrial Automation


DIN Track Push-in Terminal Blocks


Our Value Design Products Increase the Value of Your Control Panels. Push-in Plus Terminal Blocks to Downsize Control Panels and Save Work.

For building green control panels

Natural disasters caused by global warming and climate change are became global social issue,
that drives over 150 countries and regions worldwide to take action toward decarbonization.Our
goal is to reduce greenhouse gas (GHG) emissions toward half by through new ways of building
control panels, that key figure of the manufacturing site.

Integrating green perspectives into Value Design

Value Design for Panel (Value Design) is the common concept shared
across OMRON’s in-panel product specifications to deliver new value to
your control panels.
This Value Design also integrate environment consideration concept
that enable earth and user-friendly control panel building.

XW5T-P Features 3

Push-In Plus Terminal Blocks for Easy Wiring

Just Insert Wires: No Tools Required Now you can use Push-In Plus terminal blocks to reduce the time and work involved in wiring.

Greatly Reduce Wiring Work with Push-In Plus Terminal Blocks

XW5T-P Features 5

Easy to Insert

OMRON’s Push-In Plus terminal blocks are as easy as inserting to an earphone jack. They help reduce the work load and improve wiring quality.

Held Firmly in Place

Even though less insertion force is required, the wires are held firmly in place. The advanced mechanism design technology and manufacturing technology produced a spring that ensures better workability and reliability.

XW5T-P Features 7

No Retightening Required

The retightening that is required for screw terminal blocks is not required for Push-in Plus terminal blocks.
Your work load is reduced not only when wiring, but also for inspections, delivery (shipping), and maintenance.

XW5T-P Features 8

Wiring Possible with Stranded Wires

You can insert wires with pin terminals or ferrules, or you can also insert solid wires or stranded wires.

When a stranded wire is used: 3 Steps.

XW5T-P Features 10

Screwdriver Held in Place to Free Both Your Hands

Optimized shape to hold the screwdriver was created by the resin parts and the spring.
Work goes smoothly when connecting stranded wires directly to the terminal because it’s easier to aim at the desired terminal.

XW5T-P Features 11


The structure provides finger protection so that your fingers never touch conductive parts.

Minimum Width of 3.5 mm to Help Downsize Control Panels

Terminal blocks are the most numerous, most space-eating components in control panels. OMRON has achieved the top class* in the industry for downsizing.

*According to OMRON investigation in March 2017.

XW5T-P Features 14